The material which solves dust suppresion issues in places with extremely large temperature differences and with sharply changing humidity

Dust supression Ekvipol

ТУ 2250-001-99134740-2014

Ekvipol PWE(polymeric wax emulsion) product was developed by Visteks in 2014 based on its own technology for the production of polymeric wax emulsions.The main goal of the development was to create high-quality material that solves dust suppresion issues in places with extremely large temperature differences and with sharply changing humidity

In nature, there are no “universal” dust-suppressing compounds. For guaranteed dust suppression, we conduct a study of surface sample or road dust and adjust the composition of the emulsion for each surface planned for processing.

The use of Ekvipol PWE is an ideal dust suppression solution:

in the extraction of minerals, the development of coal, copper-ore, iron-ore and other quarries.

At ash dumps of thermal power plants, tailings farms of mining and chemical plants, at mining and processing plants, coal mines, etc.

In places of production, storage, transshipment of non-metallic and other materials.

When arranging and maintaining unpaved, temporary, technological highways, helipads, shift camps, etc.

Operating principle:

After entering the surface, Ekvipol PWE impregnates the entire layer by wetting each particle, including the fine dust fraction. When dried, the particles stick together, forming agglomerates and a kind of polymer-soil matrix with residual stickiness. The newly formed dust particles are integrated into the previously treated surface.

After two hours after the emulsion is applied, the soil is hydrophobized and precipitation does not affect the treated surface.

Use of Equipol PWE:

In a laboratory equipped with the most modern equipment, studies of customer surface samples are carried out. Based on the data obtained during the research, the composition of the Equipol emulsion is adjusted accordingly. After testing, the results are agreed upon with the technical specifications of the customer.

Emulsion is supplied in IBC containers (Eurocube).

At the application site, the material is diluted with water directly in the tank of the technological transport, or in another tank designed for irrigation / irrigation. The ratio to water (1: 1 - 1: 4) depends on the characteristics of the surface.

For work on the introduction of the emulsion into the surface, special equipment is not required. Uses the standard available technological transport or other means equipped with a pump (centrifugal, screw, diaphragm) and a hose.

The method of irrigation / irrigation, the solution is applied in an even layer into the surface.

Our advantages:

Ecologicaly clean. Absolutely safe product for people and animals.

Non-toxic, solvent-free, fire and explosion safe.

It is steady against hostile environment, sharp changes of temperatures, high humidity, ultraviolet, to mechanical influences of transport and equipment.

Does not impair the adhesion of car tires when driving on a treated section of the road.

Seismically stable. Blasting does not destroy and does not affect the treated layer.

Range of action, at temperatures from -45 C to +65 C.

The effectiveness of the material is up to 15 years.

Application on all types of surface irrigation. The ratio to water (1: 1 - 1: 4) depends on the characteristics of the surface.

Consumption rates:The emulsion flow rate is 0.3 - 0.5 l / m. sq. (Depends on the chemical composition of the surface, climatic conditions and the required period of effectiveness)

The product is patented